该程序是不用GD库可以生成当前时间的PNG格式图象,给人大开眼界,很有参考价值. teaman整理
<?php
function set_4pixel($r, $g, $b, $x, $y)
{
global $sx, $sy, $pixels;
$ofs = 3 * ($sx * $y + $x);
$pixels[$ofs] = chr($r);
$pixels[$ofs + 1] = chr($g);
$pixels[$ofs + 2] = chr($b);
$pixels[$ofs + 3] = chr($r);
$pixels[$ofs + 4] = chr($g);
$pixels[$ofs + 5] = chr($b);
$ofs += 3 * $sx;
$pixels[$ofs] = chr($r);
$pixels[$ofs + 1] = chr($g);
$pixels[$ofs + 2] = chr($b);
$pixels[$ofs + 3] = chr($r);
$pixels[$ofs + 4] = chr($g);
$pixels[$ofs + 5] = chr($b);
}
//生成数字图象的函数
function draw2digits($x, $y, $number)
{
draw_digit($x, $y, (int) ($number / 10));
draw_digit($x + 11, $y, $number % 10);
}
function draw_digit($x, $y, $digit)
{
global $sx, $sy, $pixels, $digits, $lines;
$digit = $digits[$digit];
$m = 8;
for ($b = 1, $i = 0; $i < 7; $i++, $b *= 2) {
if (($b & $digit) == $b) {
$j = $i * 4;
$x0 = $lines[$j] * $m + $x;
$y0 = $lines[$j + 1] * $m + $y;
$x1 = $lines[$j + 2] * $m + $x;
$y1 = $lines[$j + 3] * $m + $y;
if ($x0 == $x1) {
$ofs = 3 * ($sx * $y0 + $x0);
for ($h = $y0; $h <= $y1; $h++, $ofs += 3 * $sx) {
$pixels[$ofs] = chr(0);
$pixels[$ofs + 1] = chr(0);
$pixels[$ofs + 2] = chr(0);
}
} else {
$ofs = 3 * ($sx * $y0 + $x0);
for ($w = $x0; $w <= $x1; $w++) {
$pixels[$ofs++] = chr(0);
$pixels[$ofs++] = chr(0);
$pixels[$ofs++] = chr(0);
}
}
}
}
}
//将文字加入到图象中
function add_chunk($type)
{
global $result, $data, $chunk, $crc_table;
// chunk :为层
// length: 4 字节: 用来计算 chunk
// chunk type: 4 字节
// chunk data: length bytes
// CRC: 4 字节: 循环冗余码校验
// copy data and create CRC checksum
$len = strlen($data);
$chunk = pack("c*", ($len 24) & 255,
($len 16) & 255,
($len 8) & 255,
$len & 255);
$chunk .= $type;
$chunk .= $data;
// calculate a CRC checksum with the bytes chunk[4..len-1]
$z = 16777215;
$z |= 255 << 24;
$c = $z;
for ($n = 4; $n < strlen($chunk); $n++) {
$c8 = ($c 8) & 0xffffff;
$c = $crc_table[($c ^ ord($chunk][$n])) & 0xff] ^ $c8;
}
$crc = $c ^ $z;
$chunk .= chr(($crc 24) & 255);
$chunk .= chr(($crc 16) & 255);
$chunk .= chr(($crc 8) & 255);
$chunk .= chr($crc & 255);
// 将结果加到$result中
$result .= $chunk;
}
//主程序
$sx = 80;
$sy = 21;
$pixels = "";
// 填充
for ($h = 0; $h < $sy; $h++) {
for ($w = 0; $w < $sx; $w++) {
$r = 100 / $sx * $w + 155;
$g = 100 / $sy * $h + 155;
$b = 255 - (100 / ($sx + $sy) * ($w + $h));
$pixels .= chr($r);
$pixels .= chr($g);
$pixels .= chr($b);
}
}
$date = getdate();
$s = $date["seconds"];
$m = $date["minutes"];
$h = $date["hours"];
$digits = array(95, 5, 118, 117, 45, 121, 123, 69, 127, 125);
$lines = array(1, 1, 1, 2, 0, 1, 0, 2, 1, 0, 1, 1, 0, 0, 0, 1, 0, 2, 1, 2, 0, 1, 1, 1, 0, 0, 1, 0);
draw2digits(4, 2, $h);
draw2digits(30, 2, $m);
draw2digits(56, 2, $s);
set_4pixel(0, 0, 0, 26, 7);
set_4pixel(0, 0, 0, 26, 13);
set_4pixel(0, 0, 0, 52, 7);
set_4pixel(0, 0, 0, 52, 13);
// 创建循环冗余码校验表
$z = -306674912; // = 0xedb88320
for ($n = 0; $n < 256; $n++) {
$c = $n;
for ($k = 0; $k < 8; $k++) {
$c2 = ($c 1) & 0x7fffffff;
if ($c & 1) $c = $z ^ ($c2); else $c = $c2;
}
$crc_table[$n] = $c;
}
// PNG file signature
$result = pack("c*", 137,80,78,71,13,10,26,10);
// IHDR chunk data:
// width: 4 bytes
// height: 4 bytes
// bit depth: 1 byte (8 bits per RGB value)
// color type: 1 byte (2 = RGB)
// compression method: 1 byte (0 = deflate/inflate)
// filter method: 1 byte (0 = adaptive filtering)
// interlace method: 1 byte (0 = no interlace)
$data = pack("c*", ($sx 24) & 255,
($sx 16) & 255,
($sx 8) & 255,
$sx & 255,
($sy 24) & 255,
($sy 16) & 255,
($sy 8) & 255,
$sy & 255,
8,
2,
0,
0,
0);
add_chunk("IHDR");
// 以下不敢乱翻译,请自行参考
// scanline:
// filter byte: 0 = none
// RGB bytes for the line
// the scanline is compressed with "zlib", method 8 (RFC-1950):
// compression method/flags code: 1 byte ($78 = method 8, 32k window)
// additional flags/check bits: 1 byte ($01: FCHECK = 1, FDICT = 0, FLEVEL = 0)
// compressed data blocks: n bytes
// one block (RFC-1951):
// bit 0: BFINAL: 1 for the last block
// bit 1 and 2: BTYPE: 0 for no compression
// next 2 bytes: LEN (LSB first)
// next 2 bytes: one's complement of LEN
// LEN bytes uncompressed data
// check value: 4 bytes (Adler-32 checksum of the uncompressed data)
//
$len = ($sx * 3 + 1) * $sy;
$data = pack("c*", 0x78, 0x01,
1,
$len & 255,
($len 8) & 255,
255 - ($len & 255),
255 - (($len 8) & 255));
$start = strlen($data);
$i2 = 0;
for ($h = 0; $h < $sy; $h++) {
$data .= chr(0);
for ($w = 0; $w < $sx * 3; $w++) {
$data .= $pixels[$i2++];
}
}
// calculate a Adler32 checksum with the bytes data[start..len-1]
$s1 = 1;
$s2 = 0;
for ($n = $start; $n < strlen($data); $n++) {
$s1 = ($s1 + ord($data[$n])) % 65521;
$s2 = ($s2 + $s1) % 65521;
}
$adler = ($s2 << 16) | $s1;
$data .= chr(($adler 24) & 255);
$data .= chr(($adler 16) & 255);
$data .= chr(($adler 8) & 255);
$data .= chr($adler & 255);
add_chunk("IDAT");
// IEND: marks the end of the PNG-file
$data = "";
add_chunk("IEND");
// 列印图象
echo($result);
?>
//如何调用,其实很简单,将上面存为Timeimg.php
//然后新建一个页面如下:
<html>
<head>
<title>test</title>
<meta http-equiv="Content-Type" content="text/html">
</head>
<body>
<img src="/UploadFiles/2021-04-02/Timeimg.php"></body>
</html>
RTX 5090要首发 性能要翻倍!三星展示GDDR7显存
三星在GTC上展示了专为下一代游戏GPU设计的GDDR7内存。
首次推出的GDDR7内存模块密度为16GB,每个模块容量为2GB。其速度预设为32 Gbps(PAM3),但也可以降至28 Gbps,以提高产量和初始阶段的整体性能和成本效益。
据三星表示,GDDR7内存的能效将提高20%,同时工作电压仅为1.1V,低于标准的1.2V。通过采用更新的封装材料和优化的电路设计,使得在高速运行时的发热量降低,GDDR7的热阻比GDDR6降低了70%。
更新日志
- 小骆驼-《草原狼2(蓝光CD)》[原抓WAV+CUE]
- 群星《欢迎来到我身边 电影原声专辑》[320K/MP3][105.02MB]
- 群星《欢迎来到我身边 电影原声专辑》[FLAC/分轨][480.9MB]
- 雷婷《梦里蓝天HQⅡ》 2023头版限量编号低速原抓[WAV+CUE][463M]
- 群星《2024好听新歌42》AI调整音效【WAV分轨】
- 王思雨-《思念陪着鸿雁飞》WAV
- 王思雨《喜马拉雅HQ》头版限量编号[WAV+CUE]
- 李健《无时无刻》[WAV+CUE][590M]
- 陈奕迅《酝酿》[WAV分轨][502M]
- 卓依婷《化蝶》2CD[WAV+CUE][1.1G]
- 群星《吉他王(黑胶CD)》[WAV+CUE]
- 齐秦《穿乐(穿越)》[WAV+CUE]
- 发烧珍品《数位CD音响测试-动向效果(九)》【WAV+CUE】
- 邝美云《邝美云精装歌集》[DSF][1.6G]
- 吕方《爱一回伤一回》[WAV+CUE][454M]